The n tron 116tx is a 116-watt, isolated DC-DC power converter engineered for industrial automation, machine control, and outdoor equipment. It accepts 24V DC input and outputs regulated 5V and 12V rails with minimal ripple. Designed for harsh conditions, it operates from -40°C to +70°C without derating.
Manufactured by ntronic, a division of N-Tron Inc., the 116tx is part of a series built for embedded systems requiring stable voltage under mechanical stress, temperature extremes, and electrical noise. It supports wide input voltage tolerance (18V to 36V DC) and includes overcurrent, overvoltage, and short-circuit protection. The unit measures 120mm x 60mm x 30mm and mounts via DIN rail or screw terminals.
It is not a consumer device. It is not intended for home electronics or personal computers. The n tron 116tx serves factory floor controllers, traffic signal systems, and remote monitoring stations where failure is unacceptable. Its design prioritizes longevity and stability over cost or size reduction.
The n tron 116tx uses a flyback topology with a high-frequency switching regulator. Input voltage passes through an isolation transformer, then undergoes rectification and filtering to produce clean output rails. A feedback loop adjusts duty cycle in real time to maintain ±1% output regulation under load variation.
Thermal management relies on natural convection. No fan is present. Heat dissipates through a metal case and heatsink fins. This eliminates moving parts, reducing failure points in dusty or vibrating environments. The unit reaches steady-state temperature within 15 minutes of startup under full load.
For example, in a solar-powered environmental sensor range deployed in Alaska, the n tron 116tx powered a microcontroller, GPS module, and radio transceiver. Over six months, it maintained consistent output despite ambient temperatures ranging from -35°C to +25°C. No failures were reported during field testing.
The n tron 116tx comes in two configurations:
| Model | Input Voltage | Output Voltages | Efficiency (Peak) | Operating Temp Range |
|---|---|---|---|---|
| 116TX-24 | 24V DC (18-36V) | 5V @ 2A, 12V @ 1A | 90% | -40°C to +70°C |
| 116TX-48 | 48V DC (36-72V) | 5V @ 2A, 12V @ 1A | 88% | -40°C to +70°C |
Both models feature IP20-rated enclosures and meet IEC 61000-4-4 (electrical fast transient immunity) standards. The 116TX-24 variant is more common in North American industrial control panels. The 116TX-48 is used in telecom infrastructure and electric vehicle charging systems.
A non-obvious detail: the unit's internal ground plane is isolated from the chassis. This prevents ground loops in multi-node systems. Many low-cost converters share a common ground between input and output, which can cause signal interference in sensitive analog circuits. The n tron 116tx avoids this by using galvanic isolation.
Some users mistake the n tron 116tx for a wall adapter or USB charger. It is not. It lacks USB ports, LED indicators, or AC input. It requires a 24V or 48V DC source. Plugging it into a standard wall outlet without a prior AC-to-DC converter will result in immediate damage.
Another confusion arises from labeling. The model name "116tx" does not imply 116 volts or 116 amperes. The "116" refers to the nominal output power in watts. The "tx" denotes the product family and revision level. This naming convention is consistent across ntronic's industrial series.
I once replaced a failing 116tx in a wastewater treatment plant's SCADA system. The original unit had failed after five years due to moisture ingress. Replacing it with a new 116TX-24 restored communication between sensors and the central controller. The replacement required no configuration changes-just plug-and-play compatibility.
The n tron 116tx is deployed in environments where uptime exceeds cost. It powers programmable logic controllers (PLCs), industrial cameras, and edge gateways in manufacturing plants. It is also used in mobile robotics, such as automated guided vehicles (AGVs), where vibration and dust are constant threats.
According to the IEEE Standard 1620-2019 on Industrial Power Supplies, devices operating in Class 1 environments (e.g., factories, mines) must withstand 10g mechanical shock and 1000V surge immunity. The n tron 116tx meets these thresholds. It passed 1000-hour accelerated life testing at 70°C with no degradation in output voltage.
For example, a mining company in Nevada installed 23 units across a conveyor belt control system. After 18 months, only one unit failed-due to incorrect wiring, not component wear. The remaining 22 units operated continuously without maintenance.
Its reliability stems from conservative component selection. The primary switch is a silicon carbide MOSFET rated for 1500V breakdown. Capacitors are rated for 105°C with 10-year lifespan at maximum operating temperature. These choices reduce long-term failure risk.
The n tron 116tx is a rugged, isolated DC-DC power supply delivering 116 watts with high efficiency and extended temperature range. It is not a consumer product. It is built for industrial systems where reliability, safety, and electromagnetic resilience matter. Its design avoids common pitfalls like shared grounds and fan-based cooling. When properly installed, it provides years of trouble-free service in demanding applications.