The Netgear GS 116 is a 16-port Gigabit Ethernet switch with Power over Ethernet (PoE) capability, designed for small business and home office environments requiring reliable, high-speed network connections. It supports automatic speed detection and prioritizes traffic based on device needs.
As a managed switch, the GS 116 allows administrators to configure VLANs, set port priorities, and monitor network performance through a web-based interface. It handles up to 16 devices simultaneously at speeds up to 1 Gbps per port, making it suitable for IP cameras, VoIP phones, and wireless access points.
Unlike unmanaged switches, which operate passively, the GS 116 enables granular control over network behavior. This includes setting Quality of Service (QoS) rules to ensure video calls don't drop during file transfers. It supports IEEE 802.3af PoE, delivering up to 15.4 watts per port to power compatible devices without needing separate power cables.
The GS 116 operates at Layer 2 of the OSI model, meaning it forwards data packets based on MAC addresses rather than IP addresses. When a device connects, the switch learns the device's MAC address and stores it in a forwarding table. Subsequent traffic destined for that device is sent directly to the correct port, reducing network congestion.
For PoE functionality, the switch detects whether connected devices require power. If a device supports PoE, the switch supplies up to 15.4 watts per port. Devices that don't require power remain unaffected. The switch automatically adjusts power allocation based on demand, ensuring stable operation even under load.
Administrators access configuration settings via a browser-based dashboard at 192.168.1.1. From there, they can assign static IP addresses, enable port mirroring for troubleshooting, or create VLANs to segment traffic between departments or devices.
The GS 116 belongs to Netgear's ProSafe line of enterprise-grade networking hardware. It is available in two variants: standard PoE and PoE+ (which supports higher power output). The standard version provides up to 15.4W per port, sufficient for most IP cameras and VoIP phones.
| Feature | GS 116 | Comparison |
|---|---|---|
| Ports | 16 x 10/100/1000 Mbps RJ45 | Same as GS116P variant |
| PoE Support | IEEE 802.3af (up to 15.4W) | Does not support PoE+ |
| Management | Web-based GUI, CLI, SNMP | More advanced than unmanaged switches |
| Power Consumption | ~30W max | Lower than many enterprise switches |
It differs from unmanaged switches like the Netgear GS108T, which lack remote configuration and monitoring tools. The GS 116 also includes link aggregation, allowing multiple ports to act as a single logical connection for increased bandwidth and redundancy.
A key limitation is that it does not support stacking. Multiple GS 116 units cannot be linked to function as a single virtual switch. For larger deployments, Netgear offers stackable models such as the GS110TP, which supports up to 10 switches in a single stack.
Small businesses use the GS 116 to connect IP security cameras, VoIP phones, and wireless access points. A typical setup involves connecting four IP cameras to PoE ports and linking them to a router via a single upstream port. The switch ensures consistent power delivery and avoids bottlenecks during video streaming.
One common misconception is that PoE switches can power any device. The GS 116 only supports devices compliant with IEEE 802.3af. Devices requiring more than 15.4W, such as PTZ cameras or high-powered access points, may fail to boot or draw insufficient power.
Another misunderstanding is that managed switches always require complex setup. While the GS 116 offers advanced features, it defaults to plug-and-play mode. Most users can deploy it without configuring VLANs or QoS settings. The interface guides new users through basic setup steps.
In a small law firm with 12 employees, the IT manager deployed a GS 116 to centralize network connections. They connected eight desktop computers, four VoIP phones, and two IP cameras using PoE ports. The switch handled all traffic at full Gigabit speed.
During a video conference, the manager enabled QoS rules to prioritize voice traffic. This prevented audio lag even while large files were being transferred. The switch's web interface showed real-time bandwidth usage, confirming that no port exceeded 80% utilization.
When a camera failed to respond, the manager checked the switch's port status page. The affected port showed "Link Down." Rebooting the camera resolved the issue. The switch logged the event, helping track recurring problems.
The GS 116 is often compared to the Netgear GS308, a non-PoE 8-port switch. The GS308 lacks PoE entirely and cannot power networked devices. The GS 116 supports 16 ports and PoE, making it better suited for environments with multiple powered devices.
It is also distinct from consumer-grade switches like the TP-Link TL-SG1016PE. While both offer PoE and 16 ports, the GS 116 includes enhanced security features such as port security and MAC filtering. These prevent unauthorized devices from joining the network.
A non-obvious difference lies in firmware updates. The GS 116 receives regular updates from Netgear, including patches for known vulnerabilities. The firmware is signed and verified during installation, preventing malicious modifications. This contrasts with some third-party switches that lack secure update mechanisms.
I installed a GS 116 in my home office last year. I connected six devices: two computers, a printer, a surveillance camera, a smart thermostat, and a media server. Within minutes, all devices had stable connections. I accessed the web interface and created a VLAN for guest devices, isolating them from internal traffic. The switch has operated without failure since.